Free instant estimate
Wollongong electrician cost calculator
This calculator gives a ballpark price for common home electrical jobs in Wollongong using 2026 rates. It's a guide only - every home's wiring and switchboard is different, so a licensed electrician needs a quick site visit for a firm quote.
What this electrical work estimate includes
- Covers supply and installation of standard-grade materials, a licensed electrician's labour and a Certificate of Electrical Safety / compliance certificate.
- Assumes standard single-phase supply and reasonable access - three-phase, heritage wiring, asbestos or hard roof/subfloor access can add cost.
- A firm price needs a site visit: hidden wiring faults, non-compliant existing work and switchboard condition are only visible on the day.
- Excludes patching, plastering, painting and any council or electricity-network fees (e.g. a supply or meter upgrade) unless quoted separately.
- After-hours, weekend and emergency call-outs are charged at a higher rate.
Cost calculator questions
Do I legally need a licensed electrician?
Yes. In Australia all fixed electrical work must be carried out by a licensed electrician and certified. DIY on fixed wiring is illegal, dangerous and voids your home insurance.
Why upgrade my switchboard?
Older ceramic-fuse boards usually lack safety switches (RCDs). An upgrade adds RCD protection to your circuits, makes room for new circuits like an oven or EV charger, and brings the board up to current wiring rules.
How much does an EV charger cost to install?
A 7kW single-phase wall charger is typically $1,200-$2,800 installed. The main variables are the cable run from the switchboard, whether a dedicated circuit and load management are needed, and spare capacity in your board.
What's the difference between a partial and full rewire?
A partial rewire replaces the worst or highest-risk circuits only. A full rewire replaces all cabling, points and usually the switchboard - typical for pre-1970s homes with rubber, VIR or old aluminium wiring.
Will I get a compliance certificate?
Yes. A licensed electrician must issue a Certificate of Electrical Safety (or your state's equivalent) for the work. Keep it for your insurer and for when you sell the home.
Are safety switches (RCDs) compulsory?
Rules vary by state, but RCDs are required on most circuits in new and renovated homes and are strongly recommended everywhere. Several states also require them at point of sale or whenever electrical work is done.
Get an exact quote on your Wollongong electrical work job
Free, no-obligation written quotes. Same-day callbacks on most enquiries.